Garelli Concorde Bimatic – 1976 49cc


Home Forums Italian Motorcycles Garelli Garelli Concorde Bimatic – 1976 49cc

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #11463

    swiss_steve
    Participant

    Hi folks,

    I now need to get a set of wheels for my trusty machine (which I’ve owned since new) :D , or at least a new set of rims that I can rebuild with my existing hubs and spokes. Can anyone help, or at least with some info on where I might find such parts?

    Also, I need a new set of tyres because mine are splitting on the sidewall with age and won’t pass the MOT, but I can’t find the size advertised anywhere (front is marked with 2¼ – 16; rear is marked with 20.225).

    Any help would be really apreciated.

    Best regards,

    Steve

    #13282

    0987DAVE
    Participant

    September 18, 1999

    I have owned a Garelli Concorde for the last 20 years or so. It has not run for about 10 years or so, but now I am going to try to get it back on the road. I could do with a source of spares. I’ve found a site called http://www.mopedsonline.com for pistons and rings and a few other bits. I have the original Garelli manual for my Concorde which I think includes the Gulp-matic, its fairly basic though. I have just acquired a Garelli Super Sport which was originally for the American market, anybody got any history on this? — Andy Sharpe —

    andrew at sharpies24.freeserve.co.uk

    #13283

    swiss_steve
    Participant

    Hi Andy,

    Thanks for the tip on Garelli spares. I’ve managed to get a nearly new condition rear wheel on ebay recently…

    If you’re interested or stuck, I have all the original Garelli workshop manuals and full illustrated parts catalogue for the Concorde and some special tools that I had manufactured for me that you can use to completely change the clutch, strip the gearbox, etc… I’m sure we can work out a deal if you need any copies or wish to rent the tools…

    Cheers,

    Steve

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.