Sat Oct 01 2016
wayner at inmarindustries.com
I am trying to source parts for the M-Val 125cc engine used in the Delfino Hydrojet
Sat Oct 10 2015
veloruss at telus.net
I saw this "Tue Jan 21 2014 alejandrobulla at yahoo.com LOGO FOR THE GAS TANK MI VAL 125 1957..."
If they still need something I may be able to offer some help.
LOGO FOR THE GAS TANK MI VAL 125 1957
I'm restoring one MI VAL 125 four strokes and I need the logo MI VAL for the gas tank. At that time, the logo said CAMPIONE ITALIANO DELLA REGOLARITA 1954 and I cannot find the design with the Quality to be printed and placed again in the fuel tank. Could somebody send me this design?
Thank you very much, Alejandro Bulla Argentina
Sun Nov 25 2012
Mi-Val 75 cc
Soy due;o de un motor Mi-Val 75 cc y no tengo el bastidor. Alguien sabe donde o como conseguir uno? Me gusta la restauracion y ademas fue mi primera motito...
Argentina, San Juan
Thu Oct 25 2012
mival personal watercraft
I recently found in a barn. a mival water craft(made in jonquiere quebec,canada)not italy as the one on the internet .
As the picture is a mid 50-60's(was sold for $8000.00 in 2011 ).mine is a 1940`s.
All original with stickers and all parts.couple dings in the fiberglass body but never repaired.motor is not siezed up but no start .
I have never seen on or has anybody I know.
Appently they were beeing built in quebec, on a gouverment contract in the 40's to transport troops to shore.
Talking to older people from there (jonquiere)quebec.
Only one remembers that shop but he thinks it burnt in 40-50's and heard about the craft but never saw one.
This could well be a prototype or someone brought one home kinda deal.
It is hand cranked(with a coil on top to start the engine) inboard motor with a turbine underniether,that drags you over the water (guessing this is the great grandfather to jet ski).
Do you know anything about this?
I was planning a tear down and restore of this but think it might not be a good idea,since it is mayey one of a kind .
I was wondering if you had any information on this ??i know you like wierd and old thngs.
Mon Jun 11 2012
To whom it may concern,
Please advise what oil type and wieght I should use on my 1953 Mi-Val 125cc bike.
Thank you for your time,
New Orleans, LA, USA
You will certainly be surprised to hear from me after such a long time, but finally I went to South America (Argentina) and took the pictures (of the Alpino Mi Val 125 cc yearmodel 1956) we needed : I am enclosing 42 photographs and hope that they are good enough for making an evaluation.
Best regards from Jochen Thost !
Tue Feb 03 2009
jochen.thost at tele2.se
Alpino 125 c.c. Mi Val 1956
I met a friend in Argentina who has an Alpino 125 Mi Val motorcycle in excellent original condition. What could it be worth ?
The page on Motorcycle Valuations may prove helpful.
Finally I got the pictures of the Alpino Mi Val 125 cc yearmodel 1956 I promised You : dealing with South America means sometimes to have a great amount of patience, whether I like it or not ! Attached to these lines You will find three
pictures : is this enough to make a rough estimate of the bikevalue or do You need more details and/or photographs ? Otherwise You do not have to answer until they lead to any result : thanks in advance !
I wish You Good Luck also with this enterprise !
Thu Jun 24 2010
MI-VAL 125cc año 1954/56...?
hola gente esta es mi moto! me faltan datos para saber el modelo de fabricacion!
el nro de motor es:
MI-VAL * 64055 * MI-VAL
y el de chasis es:
bueno si alguno sabe le agradezco!
Le estan terminando el motor y el retapizado del asiento ya que ese lo hicieron muy moderno. La pintura me gusta como esta. Espero en unos dias mas ponerla en marcha y ver como anda
un abrazo desde Neuquen, Argentina
Fri Sep 19 2008
p41t at hotmial.co.uk
mi val 125 2 stroke
i would like to know where i can find parts workshop manuals sombody else in europe that got one anything please help cheers pat
Wed Aug 13 2008
natovolpe at hotmail dot com
How much could I ask for my MI VAL 125 1956?
I want to know if someone could tell how much money could I ask for selling my motobike MIVAL? it's still running perfectly?
The page on Vintage European Motorcycle Prices may prove helpful.
Thu Jul 19 2007
piciopicio11 at supereva.it
mi val 125
can you send me photos of what you have available of the mi val 125??
this is my bike!!
Sat Mar 31 2007
allaboutair2006 at msn dot com
Hi, I recently was in Playa del Carmen, Mexico and saw a gorgeous Mi Val two stroke in a hotel lobby.
I have attached a couple of pictures of it.
What year is it? what country was it made in?
Ashland, Oregon, USA
Sat Sep 02 2006
lodola at t-online.de
Hello. I have several Mivals, also a Principe 200 CC. I look for urgently an engine for the model. Who has addresses or perhaps also an engine. Thanks Peter
Tue Dec 27 2005
pradenaluis at yahoo dot com
mival 175 cc modelo 1962
Desearia si es posible contar con datos y caracteristicas de la misma .En el momento no cuento con una foto.Para ver la posibilidad de restarurarla.
Translation: Desearia if it is possible to count on data and characteristic of the same one. At the moment nonstory with a photo. In order to see the possibility of restoring it.
Wed Nov 23 2005
yoplait-2003 at yahoo.com.ar
Hi, i have a mival ohc, but i dont know the model.The VIN number is:
Can you help me??
Eduardo from argentina.
Tue Oct 25 2005
mad-maximo at zmail.pt
I have a 1961 Mi-Val Principe 200, but it has some of the engine parts missing, the most important one is one of the engine caps. I would like to know where can i find some parts or eventualy a whole engine for this bike.
I is very important to me because this bike was mine back when it was new and i had lost trace of it meanwhile. Now i found it and whant to restore it for obvious reasons. Please help me, i'm in portugal and here i can´t find
anything because, informations i got say that only two of these were sold in portugal.
Thanks in advance
Wed Jul 13 2005
dank at hippohands dot com
Mi-Val 175cc 4-stroke adjustments
Does anyone know the timing and points' gap settings for the above? I have replaced the clutch, and I'm ready to finish the reassembly of the points' plate. Any help would be appreciated
Tue May 10 2005
withdeanbike at hotmail dot com
Where can I get a manual in English for a 125 1952 MI-Val? How much oil should be in the sump? Thanks
Sat Apr 16 2005
dank at connection dot com
58 Mi-Val 175cc
I recently acquired a 58 Mi-Val, 175cc. Can you help me determine the model name and if this would be a 2 or 4 stroke engine?
I appreciate your help
...Over the weekend some people told me it's a four stroke overhead valve engine. I wish I had some info on tune up specs, such as points gap, spark plug gap, etc.
I got it running this afternoon, finally, she runs good, but I detect clutch slippage, so I'll try adjusting the cable, which is pretty tight, and if it doesn't cure that, I'll need a new clutch.
Any idea of parts' sources? Maybe it's compatible with Gileras or Ducatis?
Thanks for all your efforts,
If you have a query about Mi-Val please contact us
Triumph, BMW, & Kawasaki Sales Spares & Repairs.
Established for over 40 years and run by expert motorcyclists.
Fully authorised workshop.