Puma Motorcycle Suspension by Ferlean

Featured Pages
Supercharged Singles
Dunelt 500cc Two-Stroke

Sammy Miller's Ariel
GON-786 HT5 Trials
HT5 Ariel

Matchless OHC Racers
Collier's Overhead Cam Single 1923-1929
Matchless OHC 1920s

Ducati Gowanloch
Parts and Service for Bevel and Belt Drive Ducati. Huge stocks - Worldwide delivery. Est. 1977.

Today in Motorcycle History

Puma Motorcycle Suspension

Suspensión FERLEAN: Todas las motos PUMA 1ra y 2da serie, venían de fabrica con cuadro rígido trasero. Las suspensiones se compraban aparte y/o las vendían los mismo concesionarios. Los Hermanos dueños del taller donde se fabricaban estas suspensiones traseras se llamaban Fernando y Leandro Marttoglio y el taller estaba en la calle San Luis 318 y La Cañada en la ciudad de Cordoba. Este dato fue amablemente aportado por Norberto Peliza, ex-operario de dicho taller. Este accesorio se hacia utilizando la suspensión rígida original.

FERLEAN Suspension: All PUMA 1st and 2nd series bikes came from factory with rigid rear frame. The suspensions were bought separately and / or sold by the same dealers. The brothers who owned the workshop where these rear suspensions were made were called Fernando and Leandro Marttoglio and the workshop was located at Calle San Luis 318 and La Cañada in the city of Cordoba. This information was kindly provided by Norberto Peliza, ex-operator of the workshop. This accessory was made using the original rigid suspension.

Gilera

Paperino

Danuvia