Italjet Motorcycles


Italjet Motorcycles

A Brief History of the Marque

Leopoldo Tartarini, son of Egisto Tartarini, was a highly succesful racer who won the Milan-Taranto with a BSA-powered side-car combination which he built, and then won the first Motogiro d'Italia on a Benelli. He retired from racing after a serious accident caused spinal damage from which, against the odds, he recovered; then in 1958 he and his friend Giorgio Monetti rode around the world on 175T Ducatis.

In 1960 he founded Italemmezeta. Early machines employed MZ engines and the logo incorporated the letters MZ.

The firm name changed to Italjet in 1967, but the motorcycles had been branded Italjet for some time before that.

Italjet built a large number of different machines from fairly basic mopeds, very sporty 50 and 60cc machines, mini-bikes, 125cc singles and twins, 350cc two-stroke twins, and 500, 650 and 750cc four-stroke twins. Engines were from Franco Morini, Minarelli, Yamaha, MZ of East Germany and two British suppliers.

Italjet built limited numbers of motorcycles for Floyd Clymer in the late 1960's utilizing Royal Enfield 750cc engines to be marketed under the Indian banner. Around 15 of these quite handsome motorcycles are believed to exist. Clymer died before the project came to fruition and the remaining 200 Enfield engines were sold to Rickman, resulting in the Rickman Interceptors. Clymer also had Italjet build some 97 Velocette powered machines, of which about half had Venom Thruxton engines.

Italjet also built minibikes using Minarelli and Franco Morini Motori engines. Tartarini also built the Ossobuco minibike, understood to have been intended for the American market via Clymer.

Jawa made a Type 23 Mustang from around 1968 to 1981 using many parts supplied by Italjet but it bore no resemblance to the Italjet Mustang. Earlier, Jawa supplied 50cc engines for the Tarbo, another Tartarini company.

Italjet Models

Italjet Conquistador was similar in style to the twin-filler models.

The 250 Roadmaster and 250 Roadster (both with mag wheels, the latter with mild custom styling) had an engine apparently derived from the Ducati-based 250/325T.

The Italjet Buccaneer 125 of 1980 was fitted with a 125cc twin from Yamaha.

Italjet Models

Italjet Trials

Italjet T series engines began life at Ducati, who had been building Regolarita and MX machines. It appears Ducati did not persevere with the twostrokes and the tooling and designs passed to the nearby Italjet factory. The final model in the two-stroke series was the glorious Piuma 350T of 1983, which was followed in '84 by the Scott 350 four-stroke of 322cc which was not seriously competitive but was nontheless a very attractive machine.

By the late 1990s the Pescara factory was delivering up to 90,000 units annually to the world's markets. Tatarini's company suffered severe financial stress in the early 2000's resulting in closure of the business in 2003.

In 2005 the company was resurrected by the founder's son Massimo Tartarini, and they began building motorcycles based on the Korean Hyosung along with ebikes.

The Bologna-based designer and manufacturer sold the complete manufacturing and distribution rights for seven of its scooter models to the Kinetic group of India in January 2007.

Sources:, Wikipedia,, Museo del Patrimonio Industriale, et al.

johngav.1 at sky.con
198 italjet m5d
Forks for my m5d
Trying to find forks for my bike

Andyaudia3 at
Italjet mm5b
Iam trying to get piston and rings ,gasket set and air filter I have tried 4bifferent places with no joy its for my grandson italjet 50cc kids dike mm5b model
Andrew sykes
Dewsbury England

tommycool at
Indian Velo 500
Hello I am looking for a pair of rear shock absorbers for an Indian Velo 500 1969-70 they were made by Marzocchi (please see attachment) they measure 31mm centre of eye to eye.
Do you have a pair? of them, may be you can restore them, or have the parts (stems springs collars etc) for me to do them?
best regards
Tom Wilson
United Kingdom
  • Sorry, we don't sell parts. Gowanloch in Sydney, Australia, may be able to help. No attachment arrived with your email. Ed.

ben_harriage at
G'day from Australia,
Just picked up an Italjet minibike...and can't seem to figure out what model or year it is if you guys can help that would be amazing..if not any ideas who I can talk to?
Any help would be greatly appreciated :)
Victoria, Australia.

  • The frame appears to be a JC5C, but whether the rear wheel is original remains to be seen.
    Italjet-JC5C-Minibike-BHa image posted to Comments.

waynecassel2 at
Hi anyone have any engine parts for this bike
It's a 1977 or 78 CX50
Italjet Tarbo 350
Hi Sheldon, I recently acquired a 1969 Italjet TR350...

357.hj4 a t
Italjet M5B
Hey, I need help with finding a year made on a Italjet M5B that I just bought my husband. The only numbers we can find are on the front of frame above the fender.
They read, 6-13340. Thank you so much.
Joyce Harris
stevensjoey35 at
M5D 197??
I'm looking for the plastics for an M5D mini. Thank you for your help
Joey Stevens
Missouri USA
goose5090 at
Italjet (Unsure)
Hi would you be able to tell me what year and model the bike in the picture attached is and where I can get parts from
Frame number is 1721534 that is on headstock
Steve Day
Halesowen UK
  • For engine parts there are resources listed under Franco Morini and Minarelli (see links above). Chassis parts will be not so easy to track down. There are several minibikes similar to yours in the owners gallery, but so far the model name is elusive.
    Images posted to Comments.

mauronervo at
italjet pack 3
ciao. sapete dove trovare il fanale posteriore del pack 3?
hello. How to find the rear light of the pack 3?
Mauro Nervo
savona italia

h.follis at
possible 1973
Hi, can anyone tell me what model and year this Italjet is?
Any information (or where we could obtain information) would be gratefully appreciated.
Here’s what we know so far:
Engine: 100cc Franco Morini – New 100, engine #5-2 (stamped on crankcase behind kick start)
Frame # 3 7-10054
Carburettor: Dellorto VHB 22BS
Stator: Dansi Varese ASL236NS
Wheels: Front = 19 inch, Rear = 17 inch
Marzocchi suspension
Haydn Follis
South Wales, UK

chjjrio at
Scooter italjet velocifero 50cc 1997
I need a gas tank and seat brown color

Mon, 11 Sep 2017
javimorpel at
I need pieces Italjet pack 2, 1984

I need parts to restore an italjet pack 2, more important is the rear wheel. I want information on where to find what I am looking for.
Almonte Spain

Mon, 21 Aug 2017
rich.cargill at
Italiajet Peppery 1972

Hi am looking either a italiajet peppery engine or a pull start for engine, any help would be very much appreciated
Richard Cargill
Dundee United Kingdom

  • The Italjet Peppery is a quad with a 90cc engine. Images here.

Sat Mar 25 2017
lotemp at
Motorcycle for sale
Italjet Not sure-50cc production road racer
The picture is of one like mine, but restored. I have the orig. full fairing. Owned it 50 years.
San Diego,CA,USA

Tue Sep 27 2016
rich.cargill at
italijet peppery quad
italiajet peppery
hi am looking for a pull for italijet peepery quad,was wondering if you knew anyone who'd have one.Its a motori f morini engine
newport on tay

Sat Aug 29 2015
Kickstart spring
Italjet cx50
Hi, im looking to purchase a kickstart return spring for a 1978 italjet cx50. Any info on where i can find one, or if you know what parts are compatible would be appreciated

Sat Apr 25 2015
ksinfield1 at
Pr50 1979
italjet pr50
Any information regarding the guy in Western Australia who has Itajet parts ie email phone number please let me know - thanks in advance Scott

Mon Mar 30 2015
karina at
help to find the right model and price on italjet
Italjet M5
I would like to know what model my bike is and what price it will be worth. Because i am think af selling it. And if there is som of yours members that will be interrestet in it.

Tue Feb 10 2015
tyrone1231 at LIVE.CO.UK
italjet peppery
Can any one tell me anything about this please

Mon Feb 09 2015
gordonjgiles at
italjet 70.s model
italjet 50 cc 80 cc
are there spares still available I have the chance of getting hold of these bikes to refurbish

Sun Nov 09 2014
seeleyracer at
Workshop Manual Wiring diagram
Italjet 350 scott/vin 30187
Hi, just got this bike in boxes,i need oil filter housing and lots more.Its the white scott with tall tank and small side panels and double seat.A wiring diagram would be very helpful .Thanks for any info.

Mon Oct 27 2014
dbadgley at
Need help with identification & parts
Italjet MM5A
I need help with locating parts and identifying the year.

This machine was also marketed as an Indian Mini Mini. Fitted with a 50cc engine.

Thu Sep 18 2014
lbarr7654 at
Italjet MD5 parts needed
Italjet MD5
Looking for any plastic parts for an MD5- fenders number plates etc. NOS or good used. Any color. Thanks!

Sun Aug 17 2014
duds at
Unknown bike
Italjet Unknown
Is anyone able to identify the model
Horsham, west sussex

Tue Apr 08 2014
quantric at
Front Wheel
Italjet Bucaneer 125 1980
Hi I am looking for a nine double spoke front wheel. Fitted to either Italjet Bucaneer 125 or Malanca ECS 125. Can you help ? See picture for reference same model. Thanks Chris Quantrll


Fri Feb 28 2014
rodolin2 at
italia italjet pack 2
Hello good afternoon
will need the drive belt and pulley for italjet pack 2, you have? If not, tell me would know the action? Greetings thanks
islas canarias espana

Sat Feb 15 2014
danou852000 at
italjet ijs
vend italjet ijs en tre bon etat 3600 euro

Mon Oct 07 2013
piece detach�able
acheter gyromat ital jet
je recherche un reservoir pour le modele gyromat ital jet


Tue Sep 24 2013

italjet 11808
I need complete top end for a franco morini s5 engine or a (complete) franco morini s5 engine. can you help
dalton ga

Thu Jan 24 2013
pezzi ricambio pinza freno anteriore cod.300015
italjet fastboy 8
si prega inviare preventivo per pezzi ricambio pinza freno anteriore cod.300015 marca italjet
mod. fastboy 8

Sun Jan 06 2013
Ronaldwatsun1 AT
Info 1965 italjet conquistador
Italjet Conquistador
Hi I got this bike from a friend and was trying to find out more about it like how rare they might be And what that bike was all about. so if you tell me more about it i would appreciate it. Thanks

Image is in the Italjet gallery. Ed.

Thu Nov 01 2012
andysam<at>supanetdot com
what model
italjet kids scrambler
helli i have a kids scrambler with a frame number of 40454 and an engine number of 38207 p4,the engine is a stressed member so no front of frame,the exhaust goes above the head under the fuel tank.and it is has twin shock rear susension.
i cannot find a matching image for a model identification,can you help?

Tue Sep 04 2012
Indian ME100
Indian( italjet) ME 100
I have a 1974 Indian in the 100 it has 33 original miles on it and I have the title in hand. I'm trying to find a value for it. It needs like restoration. Thank you

Mon Oct 08 2012
need spares
italjet M5D minicross 1980-1983
hi,need spares piston and sleeve,and some other spares from South Africa if any one know were i can buy new spares or tell me what spares whoud work,please
South Africa,Vanderbijlpark

Oct 2012
Italjet Velocifero
Notes and quotes from other forums:
The first Scoot! Quarterly I ever bought (#3 with Jerry Seinfeld on the cover!) has a Velocifero review.
motor wise, they're the same as an ET2 or ET4. (Vespa)
Seeing a Velocifero always reminds me of Johnny 5 or Wall-E.
There will be at least one in Tom Hanks' movie, "Larry Crowne."

Thu Sep 06 2012
Indian mini 50cc (bambino)
italajet-indian 50cc bambino
Need help - working on a 1969-70's Indian 50cc (bambino). Need air filter, gas cap. chain guard and cam cover! any help or leads would be greatle appreciated. Thank you. Colin

Tue Aug 28 2012
warrenddt<at>yahoodot com
italjet 4weeler.Franco Marini 50cc .2cycle. FMS5N
Need piston and rings standard bore..and Gaskets
griffin GA.USA

  • This appears to be a buggy kit fitted with an FM50 engine, probably from one of Italjet's minibikes. You may have success browsing the Franco Morini Motori section.

Sat Jul 28 2012
Italjet italjet
I was just given a 5340 Italjet. I would like some information on the bike if at all possible. I am not sure what year it even is.
Michigan, United States

Thu May 24 2012
locking gas cap
Italjet 1997 Velocifero
I would like to know where I can purchase a locking gas cap for this model

Mon Apr 23 2012
Parts Needed/Have some spare parts
1972 50cc Indian (Italjet)
I am needing a front fender for a 1972 50CC Italjet.I have some spare parts and may be willing to trade for one.
Missouri, USA

Thu Apr 12 2012
Italjet m5d 82-84
Italjet M5d
Please advise where we can buy parts from. We are in South Africa but have family in the uk so are happy to order from there or any other online resource?
South Africa

Tue Apr 24 2012
how much is bike worth
italjet 1974 Pagachino
could you help me with the value of this mini bike. the bike runs with no problem. needs one fork seal replacing and back rim rebuilding as buckled. other than this its rusty in places.
united kingdom, england.
hi, for sale a 1974 italjet pagachino. Runs no problems at all. For more info please contact me via email. Make me an offer thanks

Sat Feb 11 2012
nealsplace<at>aoldot com
Kickstart Spring & gear
Indian Morini Italjet MM5A (Mini Mini)
This is for the rear kick start model

Sat Feb 11 2012
italjet 350 trials
italjet 350 T 350 Scott
i have 2 italjet trials m/c can help with info

Mon Mar 19 2012
scottiejoyner66<at>hotmaildot com
Italjet m5d minicross
looking for where i can buy a set of plastics, thank you in anticipation
Bristol, England

Tue Feb 28 2012
italjet kitkat
hi i plan to rebuild my kitkat frame number26733 with a gyromat engine,do u know where i could obtain information or a manual.i also require missing the points,ignition flywheel and cover.any information to point me in the right direction would be much appreciaterd.leon

Wed Dec 14 2011
small italian motorcycles-50-125cc
Italjet/Cimatti/Testi-ect. any model
I have extensive knolege and experance about Italjet/Cimatti/Testi bikes.Will help when possable!Contact at DA2wfl.Engrg<at>Yahoo-mail Or Don.A.1879 w Commonwealth, Fullerton,California,92833 USA, Also-NEED sorce for Grimeca large stamped steel brake hubs/parts, as on Garelli mo-peds.

Mon Oct 24 2011
ansallom<at>gmaildot com
italjet parts
italjet 50cc roadracer
restoring 50cc italjet roadracer I think it is a 1972

Tue Oct 04 2011
Italjet Parts Needed
M-5-A Mini 50cc
Need kick startlever and return spring and Magneto plate with spark plug wire atached
Texas, USA

Wed Sep 21 2011
TanK Decals
italjet M5D italjet M5D
Can you help me to located where i can get tank decals for a italjet M5D 50cc.
Southwest, UK

Tue Nov 01 2011
stewartlittle3<at>yahoodot com
italjet trike
italjet trike
can anybody help me identify a year or model code for this italjet trike

Wed Sep 14 2011
Italjet m5d minicross front shocks needed.
Italjet m5d minicross
Looking for front shocks for italjet m5d minicross
South Africa

Sat Sep 10 2011
complete engine
italjet fm-s5 dgm 10142 om
i have a complete mini bambino engine looks mint im sure it worked
Reading England

Mon Aug 29 2011
sean.seafood at
1980 Italjet Roadmaster 350cc
Italjet Roadmaster 350
Hi, I just found this 1980 Italjet that has a 350cc Bultaco 2 stroke and only 7km on it, It is Brand New, a Barn Find!!! Can anyone tell me about it or let me know if you may want to buy, runs and drives perfect!!!! I think it is a Roadmaster 350T but cannot find ANY information ANYWHERE, I think my picture may be the first ever on the web!!!!! I found a later model but no 1980, please tell me about it and how many were produced and anything else. Thank You!!!
Redondo Beach, CA

Da: mauro-casagrande<at>
Data: 6-ago-2011 16.37
Ogg: Grifon "Italjet" 650cc 1967

Questa invece una Grifon della Italjet "fabbrica di moto di Leopoldo Tartarini" in Bologna.
Era previsto la fornitura di motori Royal Enfield, poi invece non stato raggiunto l'accordo, sono stati invece montati i motori Triumph.
Prima i 500 "Daytona", molto pochi, quindi i 650 Boneville.
Il telaio previsto per il 750 constellation era molto largo, cos ho dovuto stringerlo nella parte sotto, ho anche aggiunto dei tubi nella parte sopra per farlo come il "featherbed". poi come il solito: serbatoio benzina e olio in alluminio, sella , pedane, radiatore olio, strumenti ,tubo siamese e silenziatore BSA , freno post di G 50
mentre quello davanti di Guzzi con modifiche racing.
Non mi piacciono le moto originali, preferisco modificare tutto alle mie esigenze, le impiego settimanalmente.

Un saluto rombante.......Mauro

Italjet Grifon Triumph

Google traduce:
This is a rather Grifon of Italjet "Leopoldo Tartarini motorcycle factory" in Bologna.
 Was provided for the supply of engines the Royal Enfield, but then the agreement was not reached, the engines were mounted instead Triumph.
 Before the 500 "Daytona", very few, so the 650 Boneville.
 The chassis for the 750 planned constellation was very wide, so I had to squeeze it in part below, I also added the tubes in the above to do so as the "featherbed". Then as usual: aluminum fuel tank and oil, saddle, footpegs, oil cooler, tools, pipe and silencer BSA Siamese, brake post 50 G
 while the front is Guzzi racing modifications.
 I do not like the original bike, I like to modify all of my needs, use weekly.

Wed May 11 2011
Italjet Tarbo TR 350
Looking for any info. regarding Italjet Tarbo TR 350...

Fri Mar 25 2011
cdi pack2 italjet
italjet pack 2
Bonjour je recherche allumage cdi pour pack 2 merei
France antibes

Tue Mar 08 2011
motodoffo<at>gmaildot com
Italjet side car racer
Italjet Conquistador
1965 Conquistador ,restored 02/01/2011.UNIQUE PIECE
I like to share this one with all of you.
Temecual,Ca USA

Italjet Conquistador

Wed Jan 12 2011
mini bike
italjey 22 10541
I am trying to find out what model and where I may find some transmission parts the engine number is P4S39655 Frame Number is 22 10541 Any information will be great Thanks.

Mon Jan 03 2011
mikecallesen<at>aoldot com
Parts and pieces
Italjet mini bambino I think
I am looking for parts and information on getting this bike back to its original working order. Engine = FM-S5, DGM 10142 OM, Please e-mail me any info you can support me with. Mike

  • Italjet mini bambino I think.

Mon Dec 13 2010
mikecallesen<at>aoldot com
Old bike restoration
Italjet Mini 50cc kick start
Looking for parts and emblems for mini dirt bike restoration, Red and tank is a 13 star circle flag background?
Corpus Christi, Texas

Wed Nov 24 2010
motodoffo<at>gmaildot com
looking for tank decals
USA California

Sat Nov 06 2010
Identify my mini
Maybe Italjet or Indian mm5a or bambino

I purchased this little mini bike to do up and use as a pit bike when I go watch drag racing, want to keep it authentic. Been told its either -

Italjet Bambino or Indian mm5a/mini mini

It has a franco morini motor, I'm not sure if this helps?!



  • Italjet-Bambino-perhaps

Sat Oct 30 2010
Italijet M5D
I need piston, rings topend gaskets, wrist pin.small end bearing & cips. Can anyone help?

Mon Oct 11 2010
tprobasco<at>buckeysubwaydot com
gas tank
1997 Itialjet Velocifero
I needa gas tank for a 1997 velocifero, Italjet
Columbus, Ohio

Thu Sep 30 2010
certificat de conformit�
italjet fomula 50 air
jai besoin de certificat de conformite pour mon scooter itajet car jai acheter en suisse

Wed Sep 22 2010
robertdegives AT
italjet ranger
pour des renseigements

Tue Aug 10 2010
buck-wheat77<at>hotmaildot com
Is my moped an italjet
italjet don't know
Hi i've been trying to identify this moped and have been unsuccessful so far. I found a picture of a very similar moped claiming to be a italjet Italemezzeta. I posted pictures of both. Mine is the first.


Italemmezeta was the predecessor of Italjet, a firm established in 1958 by Leopoldo Tartarini, son of Egisto Tartarini, an Italian racer. Early machines employed MZ engines.
More information at (404)

Sun Jun 06 2010
front head taillight unit pack2
helo this is robert (59) from holland please please who can help me with a head tillight unit for a italjet pack2 used or new any adress is the world is more than very welcome thank you so much
kind regards robert .
the netherlands

Thu Apr 15 2010
robertstockton33<at>aoldot com
Italjet mini M5A 50cc
I am looking for a front and rear fender for this mini, can you help me out? I would also like to make sure I have the model number right? Do you know what the bike is approx. worth?
Michigan USA

19th March 2010
From the Italjet Forum
I am in need of some help . i can't find a wiring diagram for my Italjet 100T with a minarelli motor ,it has a new IDM stator and coil . Electronic external H V . 85 watt . And it does have an original Dansi coil . but the wires have different colors . from the coil i have black , red and green , and from the stator ( exciter ) i have black , green and yellow . I have tried every combination . it still gets no spark .

Fri Feb 05 2010
farmacialocasciomendola at

italjet minarelli
Please could you help me identify my italjet.
palermo italia

Please supply engine number, frame number, engine capacity, wheel size and anything else which may help identify the machine. Ed.

Thu Jan 21 2010
eitanrumil at yahoodot com
vin location
italjet torpedo 125cc 4t
i cant find the vin number,i dont know the location....

Mon Dec 28 2009
robertmacconnell at woh.rrdot com
decal for gas tank
1967 Italjet Scout
Looking for Decal for the tank of my Scout that I'm restoring. Has a red jet like the bottom of your page. Do you have two to sell?
Bob MacConnell
Dayton Ohio USA

Mon Dec 07 2009
aspey.adam at
italjet pagachino
hi i have a italjet pagachino and it is missing some parts is there any where that sells parts for this machine ?

Fri Nov 06 2009
oneind at livedot com
piston kits
1980 italjet 350 t
looking to find parts to restore this near mint 1980 italjet 350. I live in manitoba canada and would like to know of some sources or interchangabiltys of these parts for this bike thanks greatly rob

  • I had one of those! I just loved it, such a great advance on my previous trials machine, a TY250A. I remember tackling sections which would have been plain impossible on the TY - sheer rock cliffs of maybe 15 or 20ft approachable with the great power and superior suspension of the Italjet. A real Green Meanie! Ed.

Tue Oct 20 2009
mic0463 at gmaildot com
italjet geel 50 4m
im inquiring as to whether or not i can purchase any parts for the cycle

Wed Sep 09 2009
kalem2k4 at hotmaildot com
My first motorbike
italjet jc 50cc
I am trying to find parts so I can re-condition my bike to how it onced looked. I do not know of any websites or dealers who will have an idea. Please help as I would like my kids to have as much fun on it as I once did.

Wed Jul 22 2009
shanemckinney at
Italjet Pack 2
Do you have any of these parts for sale. I wish to have a front headlight complete with the rear tail light complete.
Please Reply
Regards Shane
United Kingdom

Mon Jul 20 2009
stans6191 at aoldot com
italjet bambino
iltaljet bambino
i am looking for front forks for this minibike. i live in the new orleans area are there any parts suppliers local that i can get these from...
Louisiana, USA

Sun Jul 19 2009
syo at
Italjet minicross M5D
Italy Italjet M5D minicross
That's my Italjet! I bought it in a terrible condition and repaired it from the very begining. There are not all parts original but still I really enjoy its look.

Tue Jun 16 2009
jaimedecarmen at
jaime diaz daniel
itajet velocifero 50
busco de segunda mano

Sat May 02 2009
huggydog92 at yahoodot com
Italjet JC5C Minibike Italjet JC5C Minibike
I need to find a fully rebuilt engine for a Italjet JC5C Minibike

Thu Apr 30 2009
chuck at mainlandpowersportsdot com
Parts needed
Italjet 2001 50cc Torpedo
I'm looking for a starter motor & fuel petcock. Any suggestions?
New Jersey, USA

Sun Mar 29 2009
heinzrupp at hotmaildot com
ital jet
ital jet pack 2
Hola nos interesa la ital jet por kuanto la vende?

Mon Mar 02 2009
vogelr at
1969/70 50cc mini
indian boy racer
could you tell me if Italjet ever produced a mini cycle of this nature

Thu Jan 22 2009
waynes.world1970 at
racing bike
ital jet 50cc tarbo
hi its an auto and on the tank it has the name caccia matto number 9 it is in red has a tunnig pipe on it with twin carbs does any one no any thing about these bikes

Sun Dec 28 2008
t.r.dokter at gmaildot com
mini indian 50 tires
italjet/indian bambino
need 2.50-8 tires and tubes

There is a selection of tyre resources here:
Vintage Motorcycle Tyres

Sun Sep 21 2008
lpdno1 at aoldot com
piston rings and barral
italjet jc5c
do you know were i can get a piston and rings also a barrle for a italjet jc5c
suffolk uk

Tue Aug 05 2008
chris-kirkham at skydot com
plug/ points gap
italjet minicross
could you please tell me what the plug/ points gap is on this model also if poss the fuel ratio thanks chris

Sun Jul 20 2008
stuartdaustin at
Spare parts information
Italjet PR6
Wanted any spare parts ,parts information, parts books, users manual etc for an Italjet PR6 50cc childs moto - cross bike and the Minarelli P6 "CORSA-CORTE" 50cc engine thats fitted.Thankyou.

Fri Apr 18 2008
sales at
water pump gear
italijet formula 125 twin
do you have this gear and how much to send it to ringwood vic australia thanks

Tue Apr 01 2008
tournerie.sylvia at
je souhaiterais obtenir toutes informations sur ce modèle. merci

Tue Apr 01 2008
heidimayhew at
piaggio pack2 italjet
Hi. I hope you can help. My partner has one of these bikes which he wants to rebuild. He is looking for a parts supplier, can you help in anyway? Many thanks Heidi Mayhew
Suffolk UK

Thu Feb 07 2008
mrfattyboomboom at aoldot com
italjet bambino parts wanted
parts for an italjet bambino wanted.

Thu Jan 17 2008
justhicks at junodot com
We are needing parts for the fuel system. Can you please let us know where we could find them. Thank you.
United States

Wed Jan 02 2008
spoutbree at hotmaildot com
cx 50
i have an italjet cx 50 with 4 gears and clutch can anyone tell me wot its worth

Sun Dec 23 2007
ajfoyne40 at aoldot com
ital jet
can anyone tell me what the model an ital jet scrambler i had when iwas aboy was a two stroke single and it was 50cc .it had an expansion chamber. apparently, when my dad bought it for me he was told the flywheel kept coming off .this was a common fault with ital jets.if anyone can help possibly identifing this bike it would be appreciates.
liverpool uk

Mon Dec 03 2007
stew.jones at hotmaildot com
old italjet
1970 to 1980's italjet 4 stroke 49 cc single gear
who do i speak to for spare parts or where can i get them from i need a cog/gear for the kick starter and rear mud flap.

Mon Dec 03 2007
stew.jones at hotmaildot com
old italjet
1970 to 1980's italjet 4 stroke 49 cc single gear
who do i speak to for spare parts or where can i get them from i need a cog/gear for the kick starter and rear mud flap.

Wed Nov 28 2007
shiralee.coss at
italjet m5 parts

can anyone give me the name of a parts supplier in aussie for these machines.

Mon Nov 26 2007
gogoflandria at
Looking for informations
italjet gogo +ranger +scout 1968
hello I have 1 italjet ranger with a minarelli*rond carter* p4 engine+1 scout with a p3 engine I am looking for all info concerning those 2 moped thank you for you help

Thu Nov 15 2007
darrellwaltman at
Fuel Ratio?
Italjet MD5D Minicross
I have what appears to be a 1970's model Italjet MD5D according to the pics on this site, mine looks exactly like the photo, color and all. Does anyone have the fuel ratio for this particular bike, I have absolutely no idea where to find information on this little treasure and don't want to mess it up.
Two-Stroke Fuel Oil Mixtures

Nov 12 2007, 01:32 PM
lauramckeown-114 at
I have an italjet jc5c kids offroad bike which needs new coil has anyone got or knows where I can try to get one from. The coil is a bosch with points and condenser type ignition part no. 2 204 211 051. Any info would be great HELP.

Mon Oct 29 2007
clim.strasbourg at
recherche pieces
italjet mini bambino
je suis a la recherche de pieces pour une italjet mini bambino annee 1971.poigne de gaz ,pot d'echappement,cache allumage,si vous vous avez de pieces ou des informations
merci d'avance

Sun Sep 30 2007
bruceholland at
motore G1 KS PART NO 4070
I am trying to find a part for my sons motor bike can you help
tel oo441603702280
thanks Bruce
norwich England
the bike is an Italjet
the code no for the part from the manufactruers is 4070 40.0655.7 innnesto scorrevole messa in motto H=11.4
Hope this is of some help if can find the part it would be great
thanks Bruce

Fri Sep 21 2007
john.plunkett at millenniumdiedot com
bushing p/n 92001129
1974 indian me100 enduro
How can i get my hands on a pinion gear bushing #92001129 for the clutch pinion gear, or the specs to have one made from original blue prints, its a 1974 100cc 5 speed

Tue Sep 18 2007
wamlozjessbrad at
Date of manufacture
Italjet JC5C
I have a totally original and unmolested Italjet JC5C in red that I would like to put an age to.Im only the second owner and I even have the original handbook.It runs without fault the only problem with it is that over the years the forks have seized.What is it worth?(value)
East Midlands UK
For valuations, try the page on Classic Motorcycle Prices

Sat Sep 15 2007
deborahjudkins at
Ageing an Italjet
I recently bought an old italjet as a project for my daughters first bike but have no idea what year or model it is, i have a frame number and wanted to know if anyone knew where i can find out what the bike is so i can get a manual for it so i can get it set up correctly

Mon Aug 27 2007
gunther.ramysen at
Parts Italjet
If someone can give me more information where i can get parts from italjet or minarelli , i thank you

Fri Aug 24 2007
michel.corrihons at
parts motori morini
italjet 50 automatic
hello, I seek jaws of embreyage for my engines itajet and two rotors of allumage.look of the photographs mod�l. thank you
does y have to you it an address in France?

Wed Aug 22 2007
woden-88 at yahoodot com
italjet indain 50cc

i have a gray indian 50cc mini bike. how do i find out what year it was manufactured in? i know it was made in italy. and has what looks like a auto trans? oh yeah , where can i get the parts for it?
chango reilly

Tue Aug 21 2007
gambbever at aoldot com
kick start gears
italjet mini mini bambino
hi does any one know where i can get a kick start gear for this bike and is this gear box the same as any other modal as thay look the same as the other small bikes any info would be greatly appeaciated

Thu Aug 09 2007
tom-metz at
italjet restoration
italjet geel
if anyone has any information on where i can purchace body parts for this motorbike i would be most gratefull. any other relevent information on this model would also be a great help


Tue Aug 07 2007
yoyoboutchou at
italjet +- 1970
italjet mini bambino ou indian
je cherche apres un allumage complet pouvez vous me renseigner

Wed Aug 01 2007
jouni.puronen at luukkudot com
Help needed
Italjet Formula 50/Morini Franko Motori
Guidance needed of how to chance gear box oil. www-pages about the matter?
Tampere, Finland
Try the page of resources for Books and Manuals

Thu Jul 26 2007
traceyteasdale at
manifold rubber hose
italjet formula 50 lc
I am trying to find an intake manifold rubber hose for my scooter .. any idea where I could get one ?

Mon Jul 16 2007
dgrdayfield at
Hi there
Do u know the exact model name of this bike?
I have a similar one and am trying to get as much info on it as i can.
Regards Dylan
[Images of similar machine] Sorry, have only the information which is already on the site. Have you an image of your own bike I can use to illustrate your query?Thanks for the response. Just got the bike over the weekend. It was displayed in a bike shops window. I am 29 years old now. I had one exactly the same when i was 5 years old! I bought it for centimental reasons. I am going to restore it. Do you know what its worth? Are any parts available?

I woula really appreciate any info.

Regards Dylan Davies

Sun Jul 08 2007
mil2sell at hotmaildot com
Italjet rear rim tire
2001 italjet torpedo
I am in need of a rear rim which is busted. Would like to know if you can help me buy a new one?
New York

Wed Jul 04 2007
nicolas.gaudin at
for sale
pack 2 italjet
pack 2 for spare parts almost complete ; price 200 E
aix en pce france

Italjet Pack 2 France

Thu Jun 28 2007
wycherley616 at btinternetdot com
italjet ????
please could you help me identify my italjet i have owned on of these for 24 years i have bought another 2 since and would like to get some information before i start to rebuild them . thank you for your time . gavin

Thu Jun 28 2007
jbertschy at
Rear Wheel 8 inch
Indian Italajet 1973 50cc mini
We are looking for rear wheel assembly or spokes
for 8 inch wheel for Indian Italajet 1973 50 CC mini. Please email if you have one for sale.
North Carolina

Tue Jun 12 2007
nathan at
Italjet gas cap
Italjet Velocifero
I have been looking everywhere for a gas cap for an Italjet Velocifero scooter. Do you have any ideas?

Sun May 20 2007
sannerpass at yahoodot com
italjet 50cc pursang buster
I need the shock that goes under the seat, there is just one shock for the bike, need the parts no.
usa. Pa.

Wed May 16 2007
brymaz at
italiget m5d 50
ime restoring a early 1980 italiget need 2 find parts thanks
newcastle upon tyne

Wed May 09 2007
heritageleather at gokenoradot com
need information
italjet moto
I am about to pick up and restore a 197? italjet moto 125.I need to find the year and model. there is next to no compression and no head gasket.the head and jug are steel on steel.Is this normal? Where is the closest place to Canada to get parts?
Ontario, Canada
Would the markings on the yolk help identify the bike?

On the metal plate are the following sets of numbers;
no.08.12 09.001

Stamped into the yolk are the following;
T1 30163
D6M 50553

Tue Apr 10 2007
i have ilaljet m5 50cc...

Wed Mar 07 2007
imbert.serge at
italjet geel
je recherche toute sorte de document sur cette petite moto, je vient dans acheter une, merci

Tue Mar 06 2007
yellowridleyrider at hotmaildot com
identifying year
Italijet Mini Mini Bambin
I want to recondition this bike for my grandson as authentically as possible.How do I determine the year. Are there any brochures available. Also original colors.

Thu Mar 01 2007
tim at
tank stickers
ital jet mini bambino
I am trying to locate a photo of an original ital jet mini bambino so that I can get tank stickers made.

Sat Feb 24 2007
geoff-1810 at hotmaildot com
please can you put this picture on your site
Italjet ,mini cross,don,t know model
Dear sirs i,d like to put this picture on your websites so i can show it on the italjet forum to see if anyone can tell me what model it is and where to get parts for reguards Geoff.

Tue Feb 13 2007
nmcgeechan at
Indian 1952 motorcross
it says on the motor made in italy.
cannot find any information on this bike can you help me?
cheers from nev in australia

Thu Jan 25 2007
richardnjo at ntlworlddot com
italjet velocifero v50
bought the v50 last year its 4yr old was wondering if there are any dealers in the uk in the north west that could service it as im having trouble finding one near to me also parts and extras like wheels and stuff are they hard to come by,thank you.richard ford,warrington,cheshire,uk?

Sat Jan 13 2007
mellip1 at aoldot com
parts 2001 italjet
2001 italjet torpedo t4
any idea where i can get parts in the usa
new york

Wed Jan 03 2007
fat-valley at
italjet pagachino???
great litle bike was looking to restore it not much left to do really was looking for brake levers and a carb for 1 of these fun little bikes i have restored quite a bit already to it
durham u.k

2006 and earlier Posts

If you have a query about Italjet motorcycles please contact us