emu
Benelli Motorcycles

Benelli Motorcycles

Benelli Logo

A Little Benelli History
The Benelli story began in Pesaro with the widow Teresa Benelli establishing a garage, using all of her family's limited capital, in order to build a business to support her six sons. The garage repaired cars and motorcycles and soon went on to make spare parts. (See also Women in Motorcycling)

The small business grew, and in 1920 the first Benelli engine was produced, a 75cc two-stroke. The following year they built a Benelli motorcycle, now powered by a 98cc powerplant.

By 1923 their OHC motorcycles were on the racetrack with Antonio Benelli in the saddle, and by 1931 he had won four Italian championships. His stellar career ended with a bad crash in 1932. The bikes continued to take their riders to the front, and in 1939 the TT was won by Ted Mellors on a Benelli.

World War Two saw the total destruction of the Benelli factory in Pesaro.

The business began rebuilding after the war, but there was discord between the brothers and Guiseppe left to form his own company, Motobi.

By 1962, the two factories employed 550 people and between them were producing some 300 motorcycles a day, but by the end of the decade the Japanese onslaught was taking its toll and despite the creative skills of the new owner, Argentinian Alejondro de Tomaso (who also owned Moto Guzzi and was building some very attractive sports cars), the factory was forced to cease production. In 1980 Pesaro-based businessman Giancarlo Selci came to the rescue but the deal did not work out and Benelli slipped into obscurity until, in 1995, Andrea Merloni (whose family own Indesit, makers of whitegoods) came onto the scene. By 2002 the Tornado 900 had burst onto the world's stage, followed by the TNT Roadster of 2005.

Benelli was sold to Motor Group Qianjiang corporation located in southeast China at Wenling around 2009.

Rather nice 10min video introduction here:

  • Benelli Models 1920s-1980s


  • 01-Mar-2019
    Flo_lutza at yahoo.com
    benelli 900 sei 1980
    Hi!
    searching on web I find that it is a possibility to order here a complette exhaust for my 900sei. that RC166 curved 6 in 6. please let me know. thanks, flo
    florin dan
    Resita, Romania
    • There's a fellow in Spain who does some interesting SEI specials. It may be worth contacting him. Benelli Club Spain

    11-Nov-2018
    ron.voice at hotmail.co.uk
    benelli 900 sei
    hi I am trying to date a 900sei that I have just purchased
    engine no BGBO 11544
    Frame no DGM 18468 OM
    It has 580 miles on kph speedo which judging by condition is prob correct, it has been stored for many years and has a N.I. tax disc from 1993 on it
    Any info on year of manufacture ect ect would be greatly appreciated
    Ron Voice
    woking surrey U.K


    15-Jun-2018
    klreis at triad.rr.com
    69 benilli buzzer 65cc
    Looking for a left side cover/generator cover. Would you have any idea where l could find one.
    Kelly Reis
    Winston Salem NC usa.


    14-May-2018
    stevedavis01 at hotmail.co.uk
    i have an old Benelli 90cc which i believe is a T90 circa 1971, im looking for a wiring diagram. i can find very little info on this bike, can you help please? i include a picture found online, its exactly the same as mine
    Steve Davis
    Southampton UK


    23-Apr-2018
    gmarieelg at xplornet.com
    1971 Benelli Hurricane
    Hi. I am wanting to restore my uncle's Benelli 1971 Hurricane. I am looking for any information, such as gas to oil ratio, parts manual, etc. Any help will be appreciated. There doesn't seem to be much information on this year and model on the internet.

    Mon, 05 Mar 2018
    dale_mickle at yahoo.com
    benelli bobo scooter 1960's - 70's
    hello, I have a benelli bobo scooter that's been stored for many years. doesn't run but is a complete scooter. I was thinking of advertising it for $750 but I don't where to advertise it or what to ask for it. Might you be interested in the bike or know someone I should contact that may have interest in this scooter? thank you in advance for any feedback you can provide me
    Dale
    bernville, pa USA


    Thu, 08 Feb 2018
    uno_hoo at hotmail.co.uk
    Benelli Trail late 60s I was told

    Hi, I've recently purchased a barn find that I'd like to restore (bike in picture for reference only!). It was sold to me as a 68/69 175 trail bike. Chassis number on one side is DGM101370M, the other side is MT*11169F?? BENELLI Engine number MT*6181BENELLI. Is there any way of verifying it's age and cc from these markings? Many thanks in advance for any information or advice. Regards Ben.
    Ben Steele
    East sussex United Kingdom

    No image arrived.


    Tue, 02 Jan 2018
    recycled1cycles at gmail.com
    Benelli Dynamo Trail
    Perhaps this image could be used to update the existing image on the website of Benelli dynamo trail?

    Benelli Dynamo Trail picture attached (1973?)
    Regards
    MM
    Appleton, WI USA

    • Benelli-1972c-Dynamo-Trail-AWI.jpg posted to Comments
      Comments Button

      Go to comments
      Click the image for a clearer view.
      Login using FB, Twitter etc.


    rick_timm at hotmail.com
    Benelli 1972 175 enduro

    Hi, I recently found and purchased a 1972 175 endure. Any direction in finding parts NOS or used would be greatly appreciated.
    richard timm
    Waterloo,Ia USA


    Tue, 10 Oct 2017
    sjwatts at frontiernet.net
    Benelli 65cc Buzzer mini bike

    I am looking for points and condenser and one over piston,rings,pin,clips,pin,gaskets or a total top end rebuild kit. Do they have a needle bearing through wrist pin? Or is it just a brass bushing? The mini bike I'm restoring is a Benelli Buzzer 65cc. I thing 1970 year. Any help is greatly appreciated. Thanks
    Steve
    Sac City iowa USA


    Wed, 25 Oct 2017
    terryct2 at aol.com
    Benelli Unknown

    I have a Benelli that I have restored as a vintage racer I need a speedo and cable, and foot peg rubbers for it. The Diameter of the opening is 2 1/4 in. I don't know the year model or engine size. Can you identify it for me? Frame#H8207 Eng# HS15152.
    Curtis Terry
    Burleson,Texas 76028 USA

    • Cannot identify model from those numbers, sorry. Can you send images of the frame and engine numbers, and well as the whole bike please?


    Sat, 02 Sep 2017
    lfonda at aol.com
    Benelli need help identifying motor

    Hello I am having difficulty identifying a Benelli motor. The motor has a serial number on it: 106 6758. Can you please help? Thanks.
    Laura Hochnadel
    Thornton, CO

    • Benelli-1960s-OHV-106-6758-LHo.jpg posted to Comments
      Comments Button

      Go to comments
      Click the image for a clearer view.
      Login using FB, Twitter etc.


    Sat Jul 15 2017
    birchfam at nwlink.com
    benelli mojave 360 clutch and ignition questions
    we are trying to get clutch and ignition working properly on a 1969 mojave 360 it seems if we have the clutch tight enough not to slip when starting it drags when in low gear. we tried installing a power dynamo ignition system this didn't work not 100% sure as to why.. possibly due to clutch slippage during kicking of starter...
    Tacoma, Washington


    Fri Jun 16 2017
    terryct2 at aol.com
    Identification
    Benelli 350 ?
    Building Vintage racer
    need to know cc for proper class
    Burleson,Texas

    • This is a question best posed to your local classic racing club, I suspect.


    Fri May 26 2017
    leosilva_79 at hotmail.com
    Engine Benelli jarno 125
    Benelli Jarno 125
    Hi, I'm from Argentina and I would like to know if you still have the bike Benelli Jarno 125? I'm interested in the engine.
    Thank you
    Argentina

    Please contact the owner directly.


    Tue May 09 2017

    dieselfzkk at aol.com
    1970 benelli dynamo parts
    benelli dynamo
    looking for motor parts for my 65 cc dynamo
    florida us


    Tue Mar 14 2017
    cardozent at aol.com
    Benelli Barracuda?
    I have a barn find but not sure what I have. I think its a barracuda but the key is not on the head light its on the side cover on the right side by the battery. The exhaust pipe is on the same side and is the low to the ground. Any answer would help.
    California USA


    Mon Jan 30 2017
    freschissimo555 at gmail.com
    jetting Mikuni TM 28mm for Benelli 350
    Wards Riverside 350
    Any ideas for jetting a mikuni TM 28mm for Wards Benelli 350?
    USA

    Possibly more information under Wards Riverside


    Thu Dec 29 2016
    ajacomp at comcast.net
    wrist pin needle bearing
    Benelli Buzzer Benelli Buzzer
    Do you have a piston wrist pin needle bearing for a Benelli Buzzer

    .According to the Benelli parts book picture #79,
    part # G7019, do you have it?

    Sorry, we don't sell Benelli parts.


    Sat Mar 26 2016
    sparepartscompany at gmail.com
    Benelli 750 Sei exhaust system
    I have a customer with a 750 Sei who needs an exhaust system for his bike. Do you have any for sale or a source? Any information is appreciated. Thank you , Roland
    Philadelphia, USA


    Sat Dec 19 2015
    herbiesims57 at gmail.com
    Side Stand
    Benelli Dynamo
    Looking for side stand
    Texas


    Thu May 28 2015
    markpaz6960 at gmail.com
    plug gap? oil type? how much oil
    benelli 1968 FFA-61-14020 s/n 76
    What type of oil does it take and how much.plug gap? And where can I find an original picture of this bike?manuals?
    arizona


    Wed Jan 14 2015
    Benelli Nuovo Leoncino 125 2t
    I received an old Benelli Nuovo Leoncino 125 2t from my father...
    Posted to Benelli forum.



    Fri Sep 26 2014
    kjseward at yahoo.com
    benelli fireball
    I have a benelli fireball. The only numbers I could find are on the right side of frame under the seat area,CES*195478*. Also on the top of motor casing,266445.Can not find any information about this bike.Either number gives me any information. Would like to find out about it. Thanks, Kenny
    georgia


    Thu Jul 24 2014
    slotac at comcast.net
    Parts
    Benelli Buzzer
    I am in need of a orginal piston, ring and cylinder for a 1963 Benelli Buzzer
    Galloway, NJ, USA


    Sat Jun 07 2014
    mdknahrwold at hotmail.com
    for sale
    benelli FFA-61-14016 B
    DO NOT HAVE ROOM FOR IT
    new haven in 46774


    Sun Dec 15 2013
    dzak<at>usiwireless.com
    crankcase oil
    Benelli Fireball
    I have a 1967 Benelli Fireball. 50cc. What weight oil is used in crankcase?


    Fri Jul 05 2013
    rprogers42<at>hotmail.com
    2009 Benilli X50 i moped parts
    x50i 2009
    I am looking for parts for the moped I listed...need an oil pump and left brake handle and mounting bracket
    myrtle beach, South Carolina..USA


    Tue Jun 25 2013
    dave.carlo<at>gmail.com
    parts, repair info., manuals
    Benelli Toranado Tre 1130 cc
    need help with my newly purchased used model year 2008 Benelli Toranado Tree 1130 cc with 2,100 miles..need both owner's & factory workshop manuals.. bike makes unmanageably loud noises from the left front quarter of the engine..sounds as if the starter motor's clutch is not disengageing..is there a problem with the starter or some other common cause of this noise?..is there a factory repair bulletin ?..how to repair or what might it be it?..also where to purchase parts?.. thanks for any help with this situation...good luck to all of us we need it..
    Michigan U.S.A.

    Thank you very much for your help in posting I'm not handy with a computer...sorry don't know how to post photos...the bike is a 2008 with 2,100 miles primarily green in color with silver trim black color seat, three cylinder 1130 CC engine, she sure is a beauty.....can't imagine what the noise is as I have been riding for close to sixty years and can tell when a bike is making strange noises...this girl is not smooth in sound.....the tranny's dry clutch is not the source of the noise as the noise remains whether or not the tranny clutch is engaged or not.....gets louder with revs?...so far the only other info I was able to gather from a former dealer was that there was a notice sent out about noise and he though he recalled it had something to do with the starter motor's one way clutch? ..any further help is much appreciated...thanks again ...take care


    Fri Apr 05 2013
    spiech<at>diamondelectric.org
    repair manual
    benelli 90 cc banshee
    where can I find a repair manual
    Pennsylvania


    Tue May 07 2013
    comocrocs<at>hotmail.com
    side cover
    benelli 1972 benelli 650s tornado
    Hi I am after the left side side cover to match the yellow right side. Color not important
    australia


    Wed Apr 10 2013
    jlawmen4<at>aol.com
    Kickstart lever & Exhaust
    Benelli 250cc Riverside
    I am trying to locate a muffler and head pipe. Also a kickstart lever.
    Ravenna, Ohio


    Wed Feb 20 2013
    hugohuracan2008<at>gmail.com.ar
    datos
    benelli 175
    me podrian mandar fotos y datos benelli 175 cc 1960
    argentina


    Sat Jun 02 2012
    richard.witterick<at>googlemail.com
    Parts Needed
    Benelli 125 2c - 1976
    Hi. I'm looking for a fork Stanction (slider) and a drive shaft plus a few other bits for cosmetic reasons - Can anyone out there help?
    Regards, Richard.
    Hereford. UK


    Mon May 14 2012
    cdaviswindham<at>gmail.com
    need parts
    benelli 1972 enduro 175
    I bought a 1972 benelli at an auction and im looking for a ring and piston for the 175 2 stroke. also looking for other electrical parts. the bike is complete and original. hoping i can find the ring and piston other wise ill have to bore it out and put a newer one in.
    windham ny


    Wed May 09 2012
    fhoward.rmitchell<at>gmaildot com
    Benelli Banshee manual
    Beneli Banshee1973
    Does anyone have a manual fot this bike. Recently purchased
    New Zealand


    Mon May 21 2012
    quejamais<at>hotmail.fr
    technical manual
    benelli 49 america
    Please, I have a Benelli 49 america. That motorcycle was product in 1968. I am searching for a technical manual.

    Best regards
    Le Mans


    Wed Apr 18 2012
    robertpritchard<at>live.com
    Binneli
    500 sport
    I have a 1983 Binneli 500 in red with less than 5000 miles on the clock which I wish to sell it has not been on the road since 1985
    Portsmouth


    Sat Feb 04 2012
    robamyers1<at>aim.com
    Benelli 250 Four Cycle Carb
    Benelli 250
    Looking to find what carb I need for a 1976 Benelli 250 Four Cycle. Will a 22 and 24 MM work?
    United states


    Wed Nov 16 2011
    garin-teed<at> yahoo.com
    Parts needed
    Andretti 2008 Benalli 50cc moped
    I need a back Brake handle/bracket and cable
    Mpls Minnesota. usa


    Sun Oct 23 2011
    jdg51<at>comcast.net
    Benelli
    1977 blue
    I have left a message about my 1977 moped and someone contacted me that lives near State College, Pa. but I LOST his email address. Please contact me again about the BENELLI Moped. Thanks, Jane
    United States


    Mon Sep 26 2011
    mmartens<at>kc.rr.com
    Wanted to buy: Benelli tank
    Benelli 360 Mojave 260
    I'm looking for a tan in good condition. Any chance you could help me locate one?
    Kansas City


    Sat Sep 03 2011
    matthew-mednick<at>msndot com
    Benelli 250
    Benelli Barracuda or Sprite
    Purchased and identified a Benelli with a 250cc motor. I don't know the year and am trying to research it as a Barracuda or a Sprite. I believe the 250cc Sprite production ended 1965 and the Barracuda was introduced in 1966. This bike does not have the California edition. The first three of the VIN is: 100. Can youu help narrow down the year so I can process appropriate paperwork in order to title the motorcycle. I am inclined to call it a 1966.
    Virginia


    Thu Aug 11 2011
    jdg51<at>comcast.net
    1977
    Benelli ? Blue
    I would like to sell and need information on a 1977 Benelli Moped. Made in Pesaro, Italy. My Dad passed away and we need to sell this. It has 290 miles on it and everything is original. If anyone knows anything about this, please email me. Thanks, Jane
    New Jersey/Pennsylvania


    Wed Jul 13 2011
    5688884<at>student.swin.edu.au
    Parts
    Benelli Tnt Cafe Racer 1130
    I need to source parts for my motorcycle, i was wondering if you could give me a contact number. Thank you, im from Melbourne, Australia.
    Melbourne


    Mon Jul 04 2011
    biggreen76<at>live.com
    need help
    benelli volcano
    lookin for parts shop manuals anything for a benelli volcano
    ohio


    Wed May 11 2011
    kari.breece<at>mid-wooddot com
    Need any info
    Benellie 205 cc Sprint
    I am restoring my Father's bike. I need any information...and pictures of an original!
    United States


    Sat Apr 23 2011
    rgee<at>mtnloaded.co.za
    TNT electrical problems
    Benelli TnT naked Tre 1130 sport
    Dear Sir
    I own a Tnt Tre naked 2006 model. I have had numerous problems with the starting of the bike since I bought it new. The starter seems to labour as soon as the bike is hot, sometimes the battery will go flat while trying to start it after I have driven it and the motor is hot. Recently my bike just broke down next to the road and the battery was completely flat. I have measured the charging of the alternator and it does not seem to charge my battery anymore. Do I need a new diode for the alternator and can you ship it to me in South Africa?
    I also had my starter serviced to see if I can improve the “hot†starting problem, but now it seem like the starter is turning in the wrong direction and does not engage with the motor, the service guy says it is impossible? Does the starter have to turn clockwise or anti-clockwise? At the moment it turns clockwise and I am sure that is wrong?
    Please give me some help/ advice for in our dark continent here is no-one that has the knowledge and also no agents for benelli.

    regards

    Renier Grobler
    RGEE //KS10
    0832857875
    South Africa


    Wed Jan 12 2011
    craig--mellor<at>hotmail.co.uk
    benelli
    racer 250
    Hi i have a benelli 250 racer and i would like to know what is the correct spark plug to put in it as i am having problems with running and i believe it is a plug problem.
    many thanks for your help,
    regards, Trevor
    england


    Verzonden: vr 31-12-2010 3:58
    Aan: smid145<at>hetnet.nl
    Onderwerp: Re: Sheldon's EMU

    Benelli 650 Tornado
    Second series type with electric starter

    Beneli Tornado 650 first series (green) and second series (with electric starter ) (Group of three in museum)


    Mon Nov 29 2010
    baezarmando<at>gmaildot com
    Posibilidad de compra
    benelli motorcycle moped 2009
    Por favor, quiero saber el precio de venta al por mayor de la MOPED Motorcycle 50 2009 ,con posiblidad de representacion, si no existe en mi pais, porque pienso comprar un lote de 16 Unidades en eu. (Ver fotos anexas)
    santiago, dominican republic


    Sat Oct 30 2010
    jenniesmosaics<at>hotmaildot com
    Racer
    Benelli 250 2C
    Hi, I'm trying to build a 250 2C for Classic Racing and need as much tuning information as possible. Any race parts would help eg. tuned barrels, race pistons, modified heads, straight cut primaries, close ratio gears, etc. Anything would help and someone must know or have something.
    Thanks, Gareth.
    Bristol


    Fri Oct 22 2010
    jenniesmosaics<at>hotmaildot com
    Benelli 250 2C racer
    I am preparing a 250 2C for classic racing and would appreciate any help with race parts or road parts as spares. Whatever you have could help me. Thanks. Gareth
    Bristol


    Wed Sep 29 2010
    kraknimoreto<AT>yahoo.fr
    125 benelli 2C
    benelli 125 C
    Hello,
    I am looking for every parts from the 125 benelli 2C (if possible racing parts) for example hexaust pipe, alloy cylinder, pistons wheels...
    Me and my friend are trying to built a replica moto GP benelli 125 2C.
    please, help us, we will run in a sort of "moto legend championship" in france.
    thank you, regards,
    sebastien.


    Sun Sep 12 2010
    marcpettitt AT yahoo.com.au
    engine stalls when reved (TPS)
    BENELLI TRE1130K
    I connected a snapon scantool to my bike & reset the TPS min & max settings & now the bike stalls everytime I try to rev it, & dont know how to return original settings? Please help me.
    regards Marc
    australia


    Sat Sep 11 2010
    mvinsick1 at hotmail.com
    benelli volcano
    benelli volcano
    Looking to buy a benelli volcano.
    PA


    Tue Jul 06 2010
    eric.delohen<at>benaludot com
    engine
    benelli 125 jarno
    to sale a complete engine of benelli 125 jarno with exhaust system carburators ignition etc.......
    france


    Mon Jun 07 2010
    monster1945<at>gmaildot com
    Benelli Morercycle
    Benelli 125cc FFA-1461-14016B searial 66
    Accired bike need information what it's worth, what is it,needs lots of love but it's in tact.is anyone searching for one.
    WA


    Thu May 20 2010
    robamyers1<at>aimdot com
    66 benelli
    Benelli enduro
    I just bought a benelli and i was wondering if any one could tell me what i got and where i could go to get general info like spark plug type, oil type ect. The model number is ffa-61-14019. the title says its a riverside 66 motorcycle i was told it was a enduro 125cc but not sure. please help me out thanks a lot
    Colorado


    Wed Apr 28 2010
    tazxl1200<at>gmaildot com
    Italjet Torpedo 50 cc 2t 2001.
    Italjet torpedo 50cc 2T
    i am look for the rear shock for my italjet torpedo 50cc 2 t 2001.
    your help will be appreciate.
    USA


    Fri Apr 02 2010
    mckitchie<at>aoldot com
    carb tech support
    1972 benelli enduro 175
    Hello, I need a new needle valve and seat but i dont know what seat to get. the carb is a Dellorto vhb 22. i have four different "seat" options, 150, 170, 200, 225. i just dont know which one i need. If you could point me in the right direction that would be great, thanks
    PA

    • Both Ducati Gowanloch and Road & Race Motorcycles are knowledgeable in that department. You'll find them listed at Bikelinks

    Thu Mar 11 2010
    skplwry<at>aol.co.uk
    engine
    benelli velet 400
    what make engine is in the benelli 400 scooter
    liverpool


    Tue Oct 27 2009
    hkzal at optonline.net
    Harness wiring
    Benelli Buzzer
    I have a 1970 Benelli Buzzer and I would like some information as to where the wires go from the harness. The HT Coil has one side marked R the other is unmarked and another wire. Can someone please tell me where they go? Thank You hkzal"at"optonline.net
    New Jersey


    Tue Oct 20 2009
    craig--mellor at hotmail.co.uk
    �50 benelli single cylinder
    benelli 350 single
    Hi there, i wonder if you could help me. I have a 350 single cylinder benelli racer about 1967 and i am needing a works manual to find out what the timing is, i also need 2 new push rods so i am wondering if anyone has a manual/spares or if anyone knows where i could source these from.
    Many thanks, trev
    yorkshire/england


    Tue Oct 06 2009
    tdshan at home.co.bw
    bearing kits for eng, rings etc
    bennelli buzzer
    are spares available to rebuild eng. I have not stripped it but the kick start will not move. i suspect its seized
    Botswana
    .........
    Well I guess I lucked out, the motor and exhaust were full of water, so I removed the cyl head and used dewatering spray to free up the crank, got it running same day. It has a missfire even though the gasket is ok, would you know what the spark plug gap should be, the model of this one is 1970 serial no. 581492, any idea of what its worth


    Wed Sep 23 2009
    Miltondean at verizon.net
    parts
    benelli dynamo
    I'm looking to buy parts for my benelli do you have a contact # or email to Detlef Burian of germany
    New York


    Wed Sep 16 2009
    e-walk81 at hotmaildot com
    ignition coil
    1968 beneli buzzer 49cc
    i recently just purchased a 1968 benelli buzzer and i am getting no spark. i believe that the ignition coil is bad, however i have been searching all over for part and i was just wandering if there was a place that i could get another coil, or if there is another coil that would work in its place. please reply to this message i have had a hard time looking for this part thank you eric
    illinois, united states


    Tue Jul 21 2009
    pingjockeyb at aoldot com
    your broken flywheel
    Benelli Cobra
    Contact Cosmopolitan Motors under their vintage section (vintage cosmo). They have flywheels in stock. I just got one for my '61. Gary
    Dubuque, IA (USA)


    Pardon my ignorance but I've lost track of who owns who in Italy these days. Last time I looked Benelli was part of the De Tomaso empire. Who owns them now? Are they independent ? Are they still part of Guzzi ?

    Benelli are now owned by Italian businessman, Andrea Merloni, whose family own Indesit, makers of fridges etc. www.strega.freeserve.co.uk I forgot to mention that Franco Lambertini, designer of the 3 1/2 , has left Piaggio and moved to Franco Morini Motori as head technician. Cagiva no longer own the rights to use the Morini name, not that they ever intended to anyway , presumably Lambertini still has the designs for the "new" Morini 750cc engine he designed around the time of the Cagiva take over. A new large capacity Morini may be in the pipeline, but not for a few more years yet. -- Steve -- 478cc.cwc.net
    See also: Benelli in America


    Thu Jun 25 2009
    n6nkn at arrl.net
    Benelli "Fireball".
    Benelli Fireball
    You might enjoy my rather poor atempt at photographing my Benelli. The shots are on the Flickr web site.
    Costa Mesa,California

    http://www.flickr.com/photos/n6nkn/127521797/


    Wed Jun 03 2009
    hkzal at optonline.net
    Benelli Buzzer Gas Tank
    Benelli Buzzer
    Is the Benelli Buzzer you have with the rear wheel missing for sale?
    I need a gas tank.
    New Jersey


    Mon May 04 2009
    hkzal at optonline.net
    Identifying a Mini Bike
    Benelli Mini
    Can you identify this bike Model? It's a 1970 Benelli 521664 F
    United States


    Wed Apr 29 2009
    Poole2001 at att.net
    Benelli Motor bike
    Del Lorto 449740
    Please let me know where I can purchase a carbuator or carbuator kit for a Benelli 449740. The number on the carbuator is Sha 14 12.

    Thank you,
    Placerville, CA

    The germ of a Dellorto information page here: Dellorto Carburettors


    Wed Mar 25 2009
    diggerdowndave at hotmaildot com
    fed up
    tornado 1130
    i own a 1130 in england how do i complain to the benelli makers in italy or get some kind of help , its a new bike and has been in the garage for a month , i will never by another benelli as the after sale service is shit david bennett 15 GRAFTON LANE SANDOWN ISLE OF WIGHT ENGLAND PO368JA


    Thu Jan 29 2009
    gwen69002 at gmail.Com
    Benelli Hurricane
    Minarelli PV1 49,6cc
    Hello,

    I'm the owner of a Benelli minibike from 1969 and it's functionning with a Minarelli automatic PV1. It seems that some unknown bike of this forum are also Benelli ones. I have a Carb DELorto 16. The bike is functionning well, but quite slow. Does someone know how I could improve it?

    Thank you!
    Lyon, France


    Sun Jan 04 2009
    gordonmichelle37 at yahoodot com
    need help
    1970 benelli volcano
    im in need of some parts can anyone tell me where in the us would carry parts for this bike
    marion ohio


    Wed Nov 12 2008
    tcarpino45 at metrocast.net
    9-1978 Benelli Mophed
    Benelli 1978 mophed/19y9?
    I am trying to find parts for this bike and or sell it the way it is. I has 550 miles on it
    New Hampshire US


    Sun Nov 09 2008
    ticail at videotron.ca
    plan du sys electrique
    benelli hurricane
    Qq a un plan du sys electrique pour benelli 65cc
    canada montreal

    There may be a manual available via Books and Manuals - Resources


    Wed Oct 22 2008
    tcarpino45 at metrocast.net
    1978 Bennelli Mophed
    Benilli Mophed 19y9?
    id #gd11503 on bike,9-1978,I need connections on parts. Has 500 miles on it. can you help me?
    New Hampshire


    Fri Oct 17 2008
    vican20 at aimdot com
    antique for sale
    benelli Buzzer
    parts for sale for beleived 1969/70 benelli buzzer 65cc--contact codey on 989 388 8139
    MI


    Tue Sep 30 2008
    hanilatif at telefonica.net
    Please Help: Benelli Sei parts
    Benelli Sei 750cc
    Hello from Seville, Spain:

    A friend of mine has a beautiful 750cc Benelli Sei, which he is restoring. Could you please tell me if you know of a plce on-line where they sell engine and parts for this model? I would be very grateful.

    Thank you very much and congratulations for your great web site.

    Hani
    Seville


    Sun Sep 21 2008
    heidi.g at westnet.com.au
    Manual / Repair Handbook
    Benelli Tornado 1972
    Where can i get a Manual /Repair Handbook for a 1972 Benelli Tornado. ????
    Perth Western Australia


    Mon Sep 01 2008
    gordonmichelle37 at peoplepcdot com
    need info bad
    benelli model 1973
    i had this benelli since i was seven years old and now Im twenty four and i dont no anything about it i dont no the engine size and i do need some minor parts like the bennelli bagging which goes on the side of the gas tank but mostly i would like to get more info on my bike i love this thing it sits in my living room as a decoration something i love to stare at for hours please help thanks anything is helpfull at this point and yes it runs great and only has five hundred thirty five miles on it everything is oringinal
    marion oh


    Wed Aug 27 2008
    autocrazy at ruraltel.net
    Benelli 900 sei,
    Hi sheldon,
    going to get a 900 sei,
    looked on e E bay, and other places,
    do i join a club then more choice's,
    kansas


    Sat Aug 09 2008
    autocrazy at ruraltel.net
    900 sei
    Benelli 900Sei
    wanting one of these, all i ever saw was honda cbx's, they are nice and heavy but the benelli is special and is nice in all ways,
    the sound of the benelli six is ALOT MORE RAGGED SOUNDING THAN THE CBX EVER THOUGHT ABOUT BEING,
    sweet bike
    Kansas,


    Tue Apr 08 2008
    louisbeeckmans at tiscali.co.uk
    scott oiler
    benelli tnt
    HI there, i have just bought a 2005 tnt and would like to fix a scott oiler to it. I have been informed that this is not recomended because of the fuel injection system. Is this true or is it ok to fit one. Hope someone can help.
    newcastle-upon tyne


    Fri Feb 22 2008
    andrew.foster at nikedot com
    Engine Parts
    Benelli Minibike 1969 Dynamo
    I am looking for engine parts for my 1969 Benelli Dynamo 65cc
    Minibike. Do you have any sources that you can refer me too?
    Thanks,
    Andy Foster

    Try the Benelli Directory


    Sun Jan 20 2008
    roadbuilder1 at earthlink.net
    PARTS
    BENELLI 1971 HURRICANE
    LOOKING FOR SUPPLY OF PARTS FOR RESTORATION PROJECT


    Sun Dec 02 2007
    steve at ralph7494.freeserve.co.uk
    recing
    benelli 250c
    Hi there, i have a benelli 250 c in racing trim that is as slow as a dog, are there any contacts re tuning out there please ?
    manchester, England


    Fri Nov 09 2007
    kriek at skynet.be
    benelli 650 s
    tornado
    loking fore kickstartershaft (welle, alberino, arbre)code nr:ES668
    also starting chain (kette, catena avviam, chain d�marr)n.55pit code nr:ES238
    BELGIUM


    Wed Oct 31 2007
    ducati-guy at hotmaildot com
    fork oil
    k2 2002
    how much oil do i put in the forks of my k2 i have sae 10w fork oil but i dont know how much can you help? jake
    norwich
    .......
    its a benelli k2 2002


    Thu Oct 18 2007
    freeskatin-420 at yahoodot com
    benelli sprite 200
    I got a Benelli sprite dont really know the year its all orginal missing the heads it can be restored.
    michigan


    Wed Sep 19 2007
    rickdancingwolf at aoldot com
    value of a 1970 Benelli Volcano
    1970 Benelli Volcano
    I just obtained a good to excellent 1970 Benelli Volcano. Could you please give me an approx. Value.
    Thanks
    Rick
    Connecticut, U.S.A.
    Try the page of classic motorcycle price resources at https://cybermotorcycle.com/valuations.htm, or alternatively try a post in the Benelli Forum.


    Wed Aug 08 2007
    drcuthbert at sympatico.ca
    Benelli Minibike
    1970 Benelli Buzzer
    I have owned this bike for about 10 years . It's in pretty good shape , but needs a headlight and kickstarter assembly (push starts great)
    Require parts. bike is not for sale
    Ontario , Canada

    Fri Jun 29 2007
    motoguzzo at rogersdot com
    benelli barracuda 250cc
    for sale basket case benelli conversion to road racer was started but owner died to many details to list contact me for more bike is in ottawa ontario


    Tue Jun 19 2007
    client-scream at hotmaildot com
    I am looking for a engine
    Benelli Dynamo 50cc
    20-30 years ago mi Beneelli Dyinamo had a motor damage...an it was all the time on repairing.
    A few dazs ago I went to the service and I found my Benelli, not in great condition...
    So, now I am looking for a new engine...becouse there is no engine on my Dynamo :)

    Please...can somebody help me?
    Mali Losinj (Croatia)
    English


    Mon May 28 2007
    chaz337 at aoldot com
    Value
    Benelli 650 S
    I have the opportunity to pick up the 650 S
    Just wondering the value of a bike with low mileage? Thanks
    Charlie
    New York

    Try the page of classic motorcycle price resources at https://cybermotorcycle.com/valuations.htm


    Sat May 05 2007
    amangriffith at yahoodot com
    david horan
    1970 broncco
    need wire schematic,flywheel magneto cover,and service ro repair manual
    ny


    Wed May 02 2007
    fpegleg6666 at wmconnectdot com
    parts
    1971 65 cc Benilli
    I need a piston, wristpin,and rings
    SC


    Sun Apr 29 2007
    drouet.monique at neuf.fr
    triporteur Benelli
    I've got one but with benelli engine 50cc.
    Le Mans
    Benelli Triporteur 1972 5


    Tue Apr 03 2007
    huffman1960 at hotmail.com
    repair/owners manual
    1965-67 Benelli Barracuda
    I would like to know where to find any info on this type of motorcycle Your help is appreciated Thank you
    Maine-USA


    Fri Mar 30 2007
    johnjtank at hotmail.con
    bennelli moped
    bennelli 2 moped 1979
    where in the US can I buy parts and a repair manuel for this moped
    la calif usa


    Thu Mar 29 2007
    jane.norton at hawkins.biz
    Selling my bike
    Benelli 125 Sport
    I own a red Benelli 125 Sport two-stroke motorcycle. I understand that it was imported in 2000 and the year of manufacture has been listed in the UK as 1982. It has only done 8920 (genuine) km.

    I have all MoT certificates (from 2000) inc current one and also the service books which have detailed drawings for servicing and electrical systems diagrams.

    It is in excellent condition, the engine is fine, runs perfect and the chrome exhausts have hardly any marks on them - they polish up lovely! I am looking to sell and am open to genuine offers.
    Cambs


    Thu Mar 22 2007
    ford56 at bigponddot com
    tornado 650s
    72 tornado 650s
    can anyone help me with the factory, Piston to bore measurement for a 650s tornado engine please
    Australia


    Sat Feb 24 2007
    doug.cochran at novellusdot com
    1969 benelli 350
    I have a 1969 benelli 350 it is in rebuildable ship is this motorcycly worth rebuilding?
    usa


    Fri Feb 09 2007
    shanedrou at hotmaildot com
    two stroke mix
    benelli leoncin0 1953 125cc
    Hi There any one know the correct fuel oil ratio for a benelli 125cc leoncino
    london


    Mon Jan 22 2007
    trevor.powles at wanadoo.fr
    Triporteur
    Benelli with motor Flandria
    Hello,
    I am restoring a Triporteur, made by Benelli, the Italian Firm. The motor is a 49 cc, Flandria. I am trying to find information on this. Can you help?
    Thanks. Trevor P.
    Brittany France
    Benelli Triporteur Flandria 50cc


    Sat Jan 20 2007
    m-amoss at hotmaildot com
    Pirelli 3.5 X 7 Tires
    Benelli Hurricane
    I am in need of two pirelli 3.5 by 7 inch tires for my Hurricane. Any information would be greatly appreciated.
    Mike
    New Jersey, USA


    Sat Dec 02 2006
    kev-cpfc at hotmaildot com
    benelli cross 50 cc

    i have just brought a benelli cross for my son, but it needs a whole flywheel magneto/ generator and clutch cable, can anyone help at all, also not sure if there was ever a manual produced for this bike, many thanks, kevin and brad
    essex


    Fri Nov 24 2006
    tmcdonald at onlyinternet.net
    Dynamos
    1968 and 1970
    I have two Dynamos I would like to sell. The 68 has a factory side-car They do both run and have some new parts,but they need restored. I also have 3 boxes of spare parts.
    Indiana


    Sun Oct 22 2006
    sandra563 at btinternetdot com
    trying to restore it
    benelli trails bike 125cc year1974
    I am looking for someone in the u.k. that has parts for the above bike. I would like to find the front wheel and a speedo cable can you help.
    east sussex london


    Sun Oct 22 2006
    jarno.haapakoski at gmaildot com
    Parts needed
    Benelli Jarno
    I really need information where to get gasgets and piston for my Benelli Jarno 125 -89. Could you help me?
    Pittsburg, USA


    Wed Oct 18 2006
    john at firstclasstransdot com
    Benelli parts
    1969 260 Mojave
    I have purchased a 260 Benelli and I need right side cover and some little parts to restore this to original. Any ideas on where I should look for parts?
    Ohio


    Mon Oct 16 2006
    lilcountrygirl76 at aoldot com
    1974 Benelli volcano 180cc
    For Sale:
    Good Condition, may run, never tried it.
    make an offer! picture if needed
    winchester, va


    Thu Sep 28 2006
    mariemhfmholds at yahoodot com
    New Owner to Benelli motorcycle engine

    Informed by Qianjiang Group China that they bought Benelli engine factory, we would like to confirm with Benelli, as we are negotiating a major contract with Qianjiang in motorcycle over 1,000cc.
    Mexico


    Thu Sep 07 2006
    www.binugates at yahoo.com [bounced]
    Engine specifications
    Benelli Motorella Minibike/1965
    Please send me the technical specifications of this model. Sincerely yours.
    Bucharest


    Sat Sep 02 2006
    guentergalster at hotmaildot com
    Benelli Spares

    Just saw that several people are searching spares for different bikes. I'm almost certain you alrady know about this, but just in case I forward you the Homepage link of Mr Burian. I think he has one of the biggest stores for classic Benelli parts in Europe.
    Regards, Guenter

    benelliparts.de/


    granvill99 at yahoo.co.uk wrote:
    Tue Aug 22 2006
    > Help
    > 1975 250c
    > Hi, can anyone help. I require workshop manuel for the above to help with restoration. also main loom & engine electics. Any info at all would help lots. thanks Paul
    > Hull. England
    > English


    Mon Aug 14 2006
    almarino at orange.net
    Bennelli Parts
    Tornado 2004
    Hi,
    Do you know where i can source parts for my bike (plastics and others)? as i have found parts in the uk are very expensive. l will forward some photos later.

    Thanks
    AL
    Wales

    You could try browsing Benelli at Bikelinks for parts suppliers.


    Sat Jul 22 2006
    Bentnail at comcast.net
    Parts
    1972 Benelli 125 panther
    I'm looking for a kick starter (left side) and a clutch cable to finish this restoration. can anyone tell me where to find them?
    Illinois


    Fri Jul 21 2006
    krisandshawn2 at aoldot com
    broncco 1970
    do you have any pictures of the broncco motor mini bike i was wanting to see the orignial style.
    wv


    Sat Jul 15 2006
    evilknovel at yahoodot com
    benelli 360 scrambler gas cap
    360 scrambler
    I am in desperate need of a benelli 360 scrambler gas cap for a very cool project i"m putting together please if anyone has any information i would be very grateful i also work for a parts dealer so i could help get ahold of alot of parts
    st louis


    Mon Jul 10 2006
    info at scootartdot com
    benelli vintage minibikes
    benelli hornet '65
    Hi!

    I'm Chris and I work as a mechanic for a Montreal, Canada based vintage scootershop Named Scootart... <www.scootart.com>

    I was wondering if you guys could help me....? I'm Looking for a clutch plate set with assembly (if possible i'd go for the set only) for a '65 Benelli hornet

    I'm also looking for a good carburator for a Puch Sport moped

    a good link or the parts would be greatly appreciated, please contact me at: info at scootartdot com

    thanx in advance
    Chris
    Montreal


    Sun Jul 09 2006
    myfingerupmynose at gmaildot com
    i need everything
    1962 Benelli Cobra 125cc
    I just recently got this bike and it has most of the original parts but i really need a gasket and new rims.
    Florida


    Fri Jul 07 2006
    xoxoxo303 at aoldot com
    Oil
    Benelli Enduro
    have old Benelli Mini Enduro. What type of oil does it use
    CA

    It is almost certainly a pre-mix twostroke, in which case there is more information here: Pre-Mix Twostroke Oils


    Wed Jun 14 2006
    greeves250 at csdot com
    Need a Part
    Benelli 250 2C Phantom Looking for the plug in the left side case that covers the clutch adjustment screw. Need one in perfect condition. Anyone out there who can tell me where I can fine one.
    Thanks.
    Eric
    Colorado, U.S.


    Wed Jun 07 2006
    taxman01 at mywaydot com
    1970 dynamo trail
    Need a carb or kit. Please e-mail if you have any information.Thank you


    Wed May 24 2006
    austintylercompany at yahoodot com
    need front wheel
    1971 Benelli 650 Tonado
    Rim rust need replacement
    been sitting a while. need a mechanic book also
    Thanks alot
    Joe
    MO, USA


    Mon May 15 2006
    iburnh2o at fueleconomytipsdot com
    Benelli dynamo
    I have for sale one 1970 Benelli Dynamo 50cc 4 speed. 750 original miles. Located in central North Dakota, USA. Runs excellent. With tools, manual and title. Must sell, losing storage.
    ND, USA


    Mon May 01 2006
    zieltad at wp.pl
    lamp
    benelli naked 50cm
    Good morning ! I'm from Poland
    I'm looking for front lamp to scooter "Benelli Naked 50".
    Please send me news if You have the lamp and haw many will be cost, and is it possibility send me to Poland.

    I have Your address from benelli in Italy
    Please answer me. I'm wish You all the best
    My adres
    Tadeusz Zieli&#324;ski
    ul.Brzozowa 2
    63-910 Miejska G�rka Poland
    Phone +48608527166


    Wed Apr 19 2006
    effholger2 at freenet.de
    Bennely Dynamo
    build 1971
    Hello,
    who can help, i need a copy from a Bennely minibike Dynamo. documents> Vehicle Type Approval
    Bayern


    April 10th 2006
    Publish them, will be an honor for us...
    I add two photos, one of the exit type Lemans and other one from my house in Granada
    Regards
    Juan Miguel Martinez ALbarracin, Granada, Spain


    Thu Apr 06 2006
    grimaud at charter.net
    cost of Volcano 185 cc
    Volcano
    I am thinking of purchasing a minibike for my 13 year old son. I saw a Benelli Volcano 185cc on e-bay for $150.00. I am trying to get some information on this bike. If you can provide me with a price and MPH or any other facts, it would be greatly appreciated.
    MO


    Sun Apr 02 2006
    gt87-302 at yahoodot com
    benelli cobra
    1966 cobra 125
    i need points and condenser for my bike e mail me at
    gt87-302 at yahoodot com
    pa

    Thu Apr 06 2006
    Points/condenser
    1966 benelli cobra 125
    I do not have a picture at this time I'm also in need of a flywheel for the above mentioned bike. I discovered mine is cracked around the center of the hub. what type of puller do you recommend to remove the flywheel? thanks, Daniel
    pennsylvania

    Dansi is the name on the flywheel. It is approx. 4 1/2 inches in diameter and 1 inch in thickness. I have several types of conventional pullers but I think that they would destroy it during removal. Although at this point it doesnt matter because its cracked, so I,ll need to locate another at some point in time. Anything that you may run across would GREATLY be appreciated. THANK YOU DANIEL

    The number on the flywheel is as follows, ASL201B below this number is the manufacture date of 7 65. Hopes this is more helpful to you than my previous imformation.

    The type of flywheel puller required is similar to that pictured here, Daniel. I'll try to track down a source for the correct tool.


    Mon Mar 27 2006
    demoman25 at aoldot com
    buzzer rear tire/brake/sprocket
    1970 benelli buzzer
    Looking for rear tire,brakes,sprocket for benelli buzzer. Thanks in advance Robert
    pa


    Tue Mar 21 2006
    stevensewell1 at aoldot com
    Second Hand Parts - Price Quotes

    Benelli Tornado TRE 2004 Reg.
    Clutch Lever
    Gear change Pedal
    LHF Foot Peg
    RH Air Duct
    RH Mirror
    LH Mirror
    Front Mud Guard
    Top Cowl LH
    Top Cowl RH
    Top Cowl Stay
    Screen
    Left Handlebar
    Headlamp
    RH Inner Indicator Mounting Panel
    LH Inner Indicator Mounting Panel
    RHF Indicator
    LHF Indicator
    LHR Indicator
    London


    Tue Mar 14 2006
    elf12339 at yahoodot com
    ignition
    i have a benelli dynamo, that i belive is a 65 cc. i just got this bike and new it did not have spark. i do know that the tail light must work for spark but i can not get spark past the coil any helpful hints email me at elf12339 at yahoodot com
    New York U.S.


    Wed Mar 15 2006
    waags at brainerd.net
    Benelli Banshee 90cc 1970s
    Hi I have a banshee 90cc. I am looking for ignition, (stator coils) parts. Could any one help me? Thanks!! William Bentley
    Brainerd Mn.


    Mon Mar 13 2006
    javibilbao8 at hotmaildot com
    Benelli in cross
    Anyone remember the Benelli participation in 125 cross championship whit Alberto Barozzi?
    The model was TM based. I don't remember the year exactly (1986?)
    Cantabria. Spain


    Fri Mar 03 2006
    slotac at comcast.net
    benelli parts
    I need a piston, rings, gas cap and throttle cable for a 1963 benelli buzzer motorcycle
    USA


    Sun Mar 05 2006
    mik4242-99 at yahoodot com
    Benelli Buzzer
    Looking for parts for a benelli buzzer first, then for a dynamo. Can anyone direct me where to look?
    Wisconsin


    Benelli Archive - Messages Pre 2006


    If you have a query about Benelli motorcycles please contact us